Voltage: 12-24VDC±10%
Output type: PNP
Connection: 2m cable or M8 connector
| PNP | with 2m cable | HLF-PS |
| PNP | with M8 connector | HLF-PS-CP4 |
Product Image
Industry Experience
R&D Team
Core Technology
Cooperating Customers
| Consumption current | Normal: Max 900mW (Max 39mA at 24V; Max 52mA at 12V) Power-saving Mode: Max 800mW (Max 35mA at 24V; Max 44mA at 12V) |
| Short-circuit protection | Reverse electrode protection (power supply) overcurrent protection (output) overvoltage (output) |
| Response time | Anti OFF: 50μs(HIGN SPEED) / 250μs(FINE) / 1ms(SUPER) / 16ms(MEGA) |
| Output | PNP open-collector 24V, single-channel output maximum:100mA or less residual voltage:1V or less |
| Output selection | LIGHT-ON/DARK-ON (switch selection) |
| Operating temperature | -20℃ to 55℃ (no freezing) |
| Ambient humidity | 35 to 85% RH (non-condensing) |
| Ambient light | Sunlight: 30,000 Lux, Incandescent light: 20,000 Lux |
| Power supply voltage | 12 to 24VDC ±10%, Ripple voltage (P-P): MAX. 10% |
| Dimensions | 71.8mm(length)×9.8mm(width)×30.3mm(height) |
| Weight | Approx. 66g |
| Vibration Resistant | Frequency of 10-55Hz, complex amplitude of 1.5mm, 2 hours each in the X, Y, Z direction |
| Impact Resistant | 500m/s,Use an acceleration of 50g, each in the X, Y, Z directions three times |
| Light source | Red LED |
| Material | Polycarbonate |
| Receiver | PNP: HLF-PS PNP: HLF-PS-CP4 |